Hand tighten 4x brass PCB standoffs to Raspberry Pi.

Connect the following three cables between the Hub and the Raspberry Pi.

  1. HDMI cable
  2. Micro USB cable
  3. GPIO Breakout cable

The wide connector GPIO cable ribbon can be routed through the cable raceway.

Secure the Raspberry Pi from the underside with silver screws connecting into brass standoffs. 

This guide was first published on Sep 01, 2016. It was last updated on Sep 01, 2016.

This page (Raspberry Pi to Hub & Base) was last updated on Aug 20, 2016.

Text editor powered by tinymce.