This list covers the current (2017-and-later) version of the kit; older kit is described on the next page.
The Internet of Things Printer Project Pack for Raspberry Pi includes the following items:
- Mini Thermal Receipt Printer
- 50' roll of thermal paper
- Metal pushbutton with LED ring
- Panel-mount DC barrel jack
- 8GB SD card loaded with NOOBS
- 4700uF Electrolytic Capacitor
- Twenty (20) 6" Female/Female Premium Jumper Wires
- 5V 4A DC switching power supply
- Seven (7) laser-cut acrylic pieces
- Ten (10) 1/2" #4-40 machine screws
- Ten (10) #4-40 nuts
- Two (2) 1/4" spacers
Not included with the kit, the following tools and items are also needed for assembly and setup:
- USB keyboard (and mouse, if installing from NOOBS GUI), maybe a hub as well
- Monitor (HDMI or composite) and cable
- USB cable: A to micro B (for powering Raspberry Pi)
- Small screwdriver
- Soldering iron and solder
- Wire cutter and stripper
- A wireless (WiFi) internet access point
- Desktop or laptop computer with USB, internet connection and at least one gigabyte of free disk space for downloading and uncompressing software
- Optional: sticky tape, heat-shrink tubing
Page last edited February 20, 2017
Text editor powered by tinymce.
