Overview

The Temboo service has moved away from Arduino support. The service access in this older guide will no longer work.

In this guide, you’ll build a device that interacts with the Nexmo API to give you remote control over when a plant gets watered.  We’ll use a TI CC3200 LaunchPad and Seeed Grove Base BoosterPack to detect moisture and turn on the water, and Temboo’s new Conditions feature to connect the hardware to the Nexmo API.

This guide was first published on Mar 26, 2015. It was last updated on Mar 26, 2015. This page (Overview) was last updated on Oct 17, 2019.