The Temboo service has moved away from Arduino support. The service access in this older guide will no longer work.

To build this example project, you'll be using a TI CC3200 LaunchPad, the Seeed Grove Base BoosterPack, a servo motor, and a few other components. You’ll need:

A TI CC3200 LaunchPad

A Seeed Grove Base BoosterPack

A Grove Base Moisture Sensor

A servo motor (to correspond to the CC3200's 3.3V power supply, you may want to use a micro servo motor)

A USB A – Micro B cable

Some wires

A water tank with a valve

You'll also need a Temboo account and a Nexmo account. You can create a free Temboo account here, and a Nexmo account here.

Make sure that you have the latest version of the Energia IDE installed; if you don't, you can download it here.

This guide was first published on Mar 26, 2015. It was last updated on Mar 08, 2024.

This page (Get Set Up) was last updated on Mar 08, 2024.

Text editor powered by tinymce.