# PermaProto Feather Case
## Overview
https://youtu.be/W5ztyDfMIf0
## Project Enclosures
3D print a snap fit case for an Adafruit Perma-Proto board. Perfect for using with an Adafruit Feather. Secures a full or half-size PermaProto PCB without any screws. Easy to make with free-support 3D printing.
## Mounting Plates
The snap fit covers feature M4 sized slots for attaching to surfaces and mounting additional components.
## Project Enclosure
3D print a snap fit case for an Adafruit Perma-Proto board. Perfect for using with an Adafruit Feather. Secures a full or half-size PermaProto PCB without any screws. Easy to make with free-support 3D printing.
Featured
### Adafruit Perma-Proto Half-sized Breadboard PCB - Single
[Adafruit Perma-Proto Half-sized Breadboard PCB - Single](https://www.adafruit.com/product/1609)
Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we thought about how people **actually** prototype - usually starting with a solderless breadboard and...
In Stock
[Buy Now](https://www.adafruit.com/product/1609)
[Related Guides to the Product](https://learn.adafruit.com/products/1609/guides)
Featured
### Adafruit Perma-Proto Full-sized Breadboard PCB - Single
[Adafruit Perma-Proto Full-sized Breadboard PCB - Single](https://www.adafruit.com/product/1606)
Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we thought about how people **actually** prototype - usually starting with a solderless breadboard and...
In Stock
[Buy Now](https://www.adafruit.com/product/1606)
[Related Guides to the Product](https://learn.adafruit.com/products/1606/guides)
Featured
### Adafruit Feather M4 Express - Featuring ATSAMD51
[Adafruit Feather M4 Express - Featuring ATSAMD51](https://www.adafruit.com/product/3857)
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the **ATSAMD51J19** - with...
In Stock
[Buy Now](https://www.adafruit.com/product/3857)
[Related Guides to the Product](https://learn.adafruit.com/products/3857/guides)
Featured
### Mini Panel Mount SPDT Toggle Switch
[Mini Panel Mount SPDT Toggle Switch](https://www.adafruit.com/product/3221)
This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding whether or not to use this mini toggle switch? That's the easiest decision you'll make all day!
This...
Out of Stock
[Buy Now](https://www.adafruit.com/product/3221)
[Related Guides to the Product](https://learn.adafruit.com/products/3221/guides)
Featured
### Panel Mount 2.1mm DC barrel jack
[Panel Mount 2.1mm DC barrel jack](https://www.adafruit.com/product/610)
This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project enclosure. We like this jack in particular for its long body (so you can use it on thicker...
Out of Stock
[Buy Now](https://www.adafruit.com/product/610)
[Related Guides to the Product](https://learn.adafruit.com/products/610/guides)
### Header Kit for Feather - 12-pin and 16-pin Female Header Set
[Header Kit for Feather - 12-pin and 16-pin Female Header Set](https://www.adafruit.com/product/2886)
These two **Female Headers** alone are, well, lonely. But pair them with any of our [Feather](https://www.adafruit.com/categories/777) boards and you're in business!
What do they do? They get soldered on either side of the Feather...
In Stock
[Buy Now](https://www.adafruit.com/product/2886)
[Related Guides to the Product](https://learn.adafruit.com/products/2886/guides)
### Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack
[Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack](https://www.adafruit.com/product/4154)
In this world, nothing can be said to be certain, except we need headers, headers, and _more headers_!
Each pack contains ten candy-colored **36-pin 0.1" pitch break-away male headers.** These are a little extra special in that the plastic...
In Stock
[Buy Now](https://www.adafruit.com/product/4154)
[Related Guides to the Product](https://learn.adafruit.com/products/4154/guides)
### Silicone Cover Stranded-Core Ribbon Cable - 10 Wire 1 Meter Long
[Silicone Cover Stranded-Core Ribbon Cable - 10 Wire 1 Meter Long](https://www.adafruit.com/product/3890)
For those who are fans of our silicone-covered wires, but are always looking to _up their wiring game_. We now have **Silicone Cover Ribbon cables!** These may look _a lot_ like
In Stock
[Buy Now](https://www.adafruit.com/product/3890)
[Related Guides to the Product](https://learn.adafruit.com/products/3890/guides)
# PermaProto Feather Case
## 3D Printing
## Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.
Full Size Version
- case-fullsize.stl
- bottom-cover-fullsize.stl
- top-cover-fullsize.stl
Half Size Version
- case-halfsize.stl
- bottom-cover-halfsize.stl
- top-cover-halfsize.stl
[Download CAD files from PrusaPrinters](https://www.prusaprinters.org/prints/37200-perma-proto-feather-case)
## CAD Assembly
The Perma-Proto PCB is secured to the bottom cover using built-in tabs and standoffs. The case frame fits over the bottom cover. A DC jack and toggle switch is panel mounted to the case frame. The top cover snap fits over the the case frame.
## Slicing Parts
No supports are required. Slice with settings for PLA material.
The parts were sliced using CURA using the slice settings below.
- PLA filament 220c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
## Design Source Files
The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's board, displays, connectors and more can be downloaded from the [Adafruit CAD parts GitHub Repo](https://github.com/adafruit/Adafruit_CAD_Parts).
# PermaProto Feather Case
## Assembly
## Install Headers
Insert a 12-pin and 16-pin strip of [male headers](https://www.adafruit.com/product/4154) onto the bottom of the Feather. These will need to be soldered to the pins on the Feather.
## Breadboard Help
A [breadboard](https://www.adafruit.com/product/64) can be used to help keep the header pins nice and straight while soldering. The header pins are press into the breadboard.
## Solder Pins
Apply solder to all 28 pins on the Feather. A [silicone mat](https://www.adafruit.com/product/3536) is also helpful and provides you with a nice grippy surface. A [USB solder fume extractor](https://learn.adafruit.com/simple-mini-fume-extractor) is used to keep smelly smoke away from your face and lungs.
## Install Female Headers
Insert a 12-pin and 16-pin female headers into the male header pins respectively. The female headers will need to be soldered to the Perma-Proto PCB.
## Install Headers to Perma-Proto
Place the headers onto the perma-proto PCB with the USB port close to the edge. Mounting tack can be used to temporarily secure the headers in place while soldering. Place a couple of pieces along side the headers and perma-proto PCB.
## Solder Headers
Apply solder to the pins on the bottom of the PCB. A [panavise](https://www.adafruit.com/product/151) can help keep the PCB in place while solder. All of the holes are thru-plated and feature a nice gold finish so you won't get any oxidation.
## Remove Feather
Once all of the pins are soldered up we can remove the mounting tack. Be sure to inspect your solder joints and check to see all of the pins have enough solder.
## Install Perma-Proto PCB
Place the PCB over the built-in standoffs. Insert the PCB at an angle to fit under one of the mounting tabs. Press down to snap fit into place. Fit wiring in between the snaps.
## Install Case Frame
Place the case over the bottom cover and snap fit the edges together. The side with the notches are used to pass wires through.
## Install Top Cover
Place the top cover over the case and line up the snaps. Firmly press down to snap fit cover. And there you have it! Your Perma-Proto Feather case is ready for action.
## Guide Products
### Adafruit Perma-Proto Half-sized Breadboard PCB - Single
[Adafruit Perma-Proto Half-sized Breadboard PCB - Single](https://www.adafruit.com/product/1609)
Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we thought about how people **actually** prototype - usually starting with a solderless breadboard and...
In Stock
[Buy Now](https://www.adafruit.com/product/1609)
[Related Guides to the Product](https://learn.adafruit.com/products/1609/guides)
### Adafruit Perma-Proto Full-sized Breadboard PCB - Single
[Adafruit Perma-Proto Full-sized Breadboard PCB - Single](https://www.adafruit.com/product/1606)
Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we thought about how people **actually** prototype - usually starting with a solderless breadboard and...
In Stock
[Buy Now](https://www.adafruit.com/product/1606)
[Related Guides to the Product](https://learn.adafruit.com/products/1606/guides)
### Adafruit Feather M4 Express - Featuring ATSAMD51
[Adafruit Feather M4 Express - Featuring ATSAMD51](https://www.adafruit.com/product/3857)
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the **ATSAMD51J19** - with...
In Stock
[Buy Now](https://www.adafruit.com/product/3857)
[Related Guides to the Product](https://learn.adafruit.com/products/3857/guides)
### Mini Panel Mount SPDT Toggle Switch
[Mini Panel Mount SPDT Toggle Switch](https://www.adafruit.com/product/3221)
This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding whether or not to use this mini toggle switch? That's the easiest decision you'll make all day!
This...
Out of Stock
[Buy Now](https://www.adafruit.com/product/3221)
[Related Guides to the Product](https://learn.adafruit.com/products/3221/guides)
### Panel Mount 2.1mm DC barrel jack
[Panel Mount 2.1mm DC barrel jack](https://www.adafruit.com/product/610)
This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project enclosure. We like this jack in particular for its long body (so you can use it on thicker...
Out of Stock
[Buy Now](https://www.adafruit.com/product/610)
[Related Guides to the Product](https://learn.adafruit.com/products/610/guides)
### Header Kit for Feather - 12-pin and 16-pin Female Header Set
[Header Kit for Feather - 12-pin and 16-pin Female Header Set](https://www.adafruit.com/product/2886)
These two **Female Headers** alone are, well, lonely. But pair them with any of our [Feather](https://www.adafruit.com/categories/777) boards and you're in business!
What do they do? They get soldered on either side of the Feather...
In Stock
[Buy Now](https://www.adafruit.com/product/2886)
[Related Guides to the Product](https://learn.adafruit.com/products/2886/guides)
### Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack
[Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack](https://www.adafruit.com/product/4154)
In this world, nothing can be said to be certain, except we need headers, headers, and _more headers_!
Each pack contains ten candy-colored **36-pin 0.1" pitch break-away male headers.** These are a little extra special in that the plastic...
In Stock
[Buy Now](https://www.adafruit.com/product/4154)
[Related Guides to the Product](https://learn.adafruit.com/products/4154/guides)
### Silicone Cover Stranded-Core Ribbon Cable - 10 Wire 1 Meter Long
[Silicone Cover Stranded-Core Ribbon Cable - 10 Wire 1 Meter Long](https://www.adafruit.com/product/3890)
For those who are fans of our silicone-covered wires, but are always looking to _up their wiring game_. We now have **Silicone Cover Ribbon cables!** These may look _a lot_ like
In Stock
[Buy Now](https://www.adafruit.com/product/3890)
[Related Guides to the Product](https://learn.adafruit.com/products/3890/guides)
## Related Guides
- [Adafruit Feather M4 Express](https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51.md)
- [Make your own PCB with Eagle, OSH Park, and Adafruit!](https://learn.adafruit.com/making-pcbs-with-oshpark-and-eagle.md)
- [Ambient Sound Machine](https://learn.adafruit.com/ambient-machine.md)
- [PyPortal Roku Remote](https://learn.adafruit.com/pyportal-roku-remote.md)
- [MIDI for Makers](https://learn.adafruit.com/midi-for-makers.md)
- [HalloWing Interactive Cat Toy](https://learn.adafruit.com/hallowing-cat-toy.md)
- [Cyber Cat MIDI Keyboard](https://learn.adafruit.com/midi-cyber-cat-keyboard.md)
- [Personal and Portable ESP32-S2 Web Server](https://learn.adafruit.com/wordle-personal-esp32-s2-web-server.md)
- [Introducing Adafruit Feather](https://learn.adafruit.com/adafruit-feather.md)
- [NeoPixel Flame Torch](https://learn.adafruit.com/neopixel-flame-torch.md)
- [Light Up Prop with Prop-Maker](https://learn.adafruit.com/prop-maker-light-wand.md)
- [eInk FeatherWing Display Stand](https://learn.adafruit.com/eink-featherwing-display-stand.md)
- [Computer Space Mini Arcade](https://learn.adafruit.com/computer-space-mini-arcade.md)
- [CircuitPython 101: State Machines, Two Ways](https://learn.adafruit.com/circuitpython-101-state-machines.md)
- [STEMMA Lego base plates](https://learn.adafruit.com/stemma-lego-base-plates.md)
- [How To Solder Headers](https://learn.adafruit.com/how-to-solder-headers.md)