Build a PC case inside a Keyboard

Plug into any HDMI display! Browse, work, watch streaming video and code, just like any computer!

Most single board computers, like a Raspberry Pi, fit right into the small form factory of a keyboard with built-in trackpad. Easily detach the keyboard to access additional GPIO hidden inside the case. 

Ports on the back allow you to attach accessories and keep them tidy!

Room to grow

This case works with both Pi 3 or Pi 4 'shaped' boards!

The case has plenty of room to store extra wires. Fan mount with a ventilation grill keeps the PC cool with enough space to add a heat sink.

SD Card Slot

The Micro SD card slot is accessible on the front so you can always swap it out.

Grippy, stable base

Add a set of rubber feet to the bottom so it’s nice and grippy.

The mini fan provides air flow to the board so it stays nice and cool.

Cable Coiling

With the extra space you can pull out the HDMI and microUSB cable for connecting to a display and power supply.

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.25 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

Build Plate Adhesion 

• Type: brim
• Line Count: 4

Snap fit

The enclosure snap fits over the bottom panel so it’s easy to open and take things apart.

Built in standoffs are designed for standard mounting holes so you can secure the board with screws and hex nuts.

Power up the mini fan over five volts by plugging in jumper cables to the GPIO headers