Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.25 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

Build Plate Adhesion 

• Type: brim
• Line Count: 4

Snap fit

The enclosure snap fits over the bottom panel so it’s easy to open and take things apart.

Built in standoffs are designed for standard mounting holes so you can secure the board with screws and hex nuts.

Power up the mini fan over five volts by plugging in jumper cables to the GPIO headers