3D Printed Parts

STL files for 3D printing will need to be oriented for print using either FDM or SLS machines.

Parts were tested using PLA filament.

Original design source files may be downloaded using the links below

Slice with Settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 200c extruder
• 0.25 layer height
• 20% gyroid infill
• 60mm/s print speed
• 60°C heated bed

Face plates

You can customize the front face plates for the case to match for preferred theme part. The design includes mouse ears and a shark!

The face plates press fit onto the front of the case over the display.

Multicolor face plate

The shark face plate is designed to be stacked and glued for single extruder printers.