Perma-Proto for QT Py

The QT Py RP2040 will connect to the quarter-sized Perma Proto using a mix of male and female headers. 

This makes the QT Py modular so it can be removed from the Circuit and repurposed.

Header Setup

Use the following headers to connect the QT Py to the Perma Proto.

  • 2x 1x7 short female header strip
  • 2x 1x7 short male header strip

Install QT Py to Perma Proto

Fit the two strips of male header pins under the QT Py PCB.

Place the two strips of female header pins under the male pins.

Position the QT Py in the center of the Perma Proto and place it down with the female pins going into the pins.

Solder Headers to Perma Proto

Carefully flip the two PCB's and begin to solder the pins in place.

Soldered QT Py and Perma Proto

Take a moment to check all of the pins have been properly soldered.

This guide was first published on Jul 13, 2022. It was last updated on Dec 08, 2023.

This page (QT Py Headers) was last updated on Jul 11, 2022.

Text editor powered by tinymce.