October is open-source month. What better way to celebrate it than by using open-source hardware and software to celebrate all of the amazing open-source hardware that's been certified by OSHWA over the last few years!
In this project, you'll program an Adafruit MagTag to display one project from OSHWA every hour. You'll display the title of the project, the description, and a QR code you can easily scan to look at the full project.
This kit contains all the necessary parts except for a USB cable
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
guides with product
Out of Stock
Or get the pieces separately:
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
guides with product
Out of Stock
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
This is optional, but useful if you want to secure the battery to the MagTag.
UGlu Dashes are perfect for a variety of small projects. These adhesive squares provide a stronger bond to most surfaces and are cleaner and easier to...
$0.95
In Stock
Last but not least, make sure to pick up a USB-C cable, if you don't already have one.
As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock
Text editor powered by tinymce.
