CAD Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. The laser holder is designed to 3D print without any support material, but supports are recommended on the project base. Original design source may be downloaded using the links below:
- Project Base
- Laser Holder
Build Volume
The parts require a 3D printer with a minimum build volume.
- 75mm (X) x 95mm (Y) x 30mm (Z)
Slicing the Base
For best results, supports are suggested with printing the base because of the overhangs.
Page last edited March 08, 2024
Text editor powered by tinymce.
