Want to turn on and off any device that plugs into a normal outlet? Then this project is for you!

In this project, you'll connect an electronically controlled surge protector with a built-in relay. You'll connect the funhouse to Adafruit IO WipperSnapper and be able to control the device over the internet. Oh, and did I mention that you'll be doing this without having to write any code at all?

Parts

Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland....
$34.95
In Stock
Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control....
Out of Stock
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our...
$1.25
In Stock
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock

This guide was first published on Oct 12, 2021. It was last updated on Oct 12, 2021.

This page (Overview) was last updated on Nov 22, 2021.

Text editor powered by tinymce.