No-Code IKEA Vindriktning Air Quality Sensor Hack with Adafruit IO

Connect your IKEA Vindriktning to send air quality the internet, no programming required!

by Brent Rubell

published November 29, 2023, last edited July 07, 2025
last major update July 07, 2025

posted in Hacks Sensors/ Temperature & Humidity Internet of Things - IOT/ Adafruit IO STEMMA

Save Download

36

Beginner

Project guide

Disassembly

Using a long and thin screwdriver, remove the four screws from the back of the air quality monitor.

Slide out the front panel of the air quality monitor. You'll see the PM1006 module and fan plugged into the PCB.

Unplug the PM1006 and fan connectors from the PCB.

Remove the three screws mounting the PCB to the front panel.

Lift the PCB out of the front panel. Now you're ready for soldering.

Page last edited March 08, 2024

Text editor powered by tinymce.

Search