3D Printed Bumper
This is a simple 3d printed bumper for the Adafruit NeoTrellis M4 designed for flexible filaments. This provides protection and comfort to the acrylic case.
Flexible Filaments
The bumper features a cut out on the back side for cables. The design is optimized for 3D printing using flexible filaments, such as Cheetah Ninjaflex and does not require any support material.
How to 3D Print Flexible Filament
Our learn guide will walk you through some common practices for 3D printing with flexible filaments successfully.
|
|
|
Slice Settings
Use these settings as reference. Values listed were used in Ultimaker's CURA 3.X slicing software. This was 3d printed using an Ultimaker S5 and 3.
- Material Profile: TPU 95A
- .2 layer height / .35 Line Width
- 2 wall line count / 10% infill
- 220C/60C printer temp
- 8mm retraction distance /35mm/s retraction speed
- 25mm/s print speed (150mm travel)
Parts, Tools, Supplies
All we need for this project is the Adafruit NeoTrellis M4 Kit, flexible filament and a 3D printer.
So you've got a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk...
Out of Stock
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaTek's Cheetah series, a cutting-edge filament for 3D...
Out of Stock
The Ultimaker 3 is one of our favorite 3D printers on the market. It's a well-built open-source compact machine with an excellent UX. Every inch of the...
Out of Stock
The Monoprice Inventor II 3D Printer Touchscreen with WiFi is a perfect entry-level 3D printer with small footprint and reliable performance. It comes equipped with...
Out of Stock
