Angled shot of purple square-shaped microcontroller.
Featured
This dev board is like when you're watching a super-hero movie and the protagonist shows up in a totally amazing costume in the third act and you're like 'OMG! That's the hero and they're here to kick some serious butt!" but in this case its a...
view other guides that use this product
$14.95 each
In Stock
Video of a person with white painted nails unplugging a USB cable from a small, black, square-shaped lipo battery breakout board soldered to a similarly shaped microcontroller, which is also connected to a monochrome OLED display breakout. The OLED breakout displays battery and power data.
Featured
Is your QT Py all alone, lacking a friend to travel the wide world with? When you were a kid you may have learned about the "buddy" system, well this product is kinda like that! A board that will watch your QT...
view other guides that use this product
$5.95 each
In Stock
Video of glowing star-shaped LED strip.
Featured
Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little shooting stars of color? Use these stranded NeoPixel LEDs that come in adorable 5-pointed star shapes.Each strand has 20 stars with a single RGB...
view other guides that use this product
$8.95 each
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Featured
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery,
$6.95 each
In Stock
Front angled shot of 3 x AAA battery holder with on-off switch and 2-pin JST PH connector.
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes...
$1.95 each
In Stock
Front shot of JST-PH Battery Extension Cable.
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable...
$1.95 each
In Stock
Silicone Cover Stranded-Core Wire - 30AWG in Various Colors laid out beside each other.
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to...
Out of Stock
close up of ends of various small heat shink tubes
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super...
Out of Stock