The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Adafruit uses the Adafruit's Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

• The slide switch is connected to the EN and GND pins on the Feather.
• A 400mAh battery is connected to the battery port on the Feather.
• The ANO Rotary Encoder is connected to Feather using a STEMMA QT cable.

24x NeoPixel Ring

• Data Input from NeoPixel ring to D5 on Feather
• GND from NeoPixel ring to GND on Feather
• +5V from NeoPixel ring to 3V on Feather