Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slicing Parts

 

Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

This guide was first published on Nov 16, 2021. It was last updated on 2021-11-16 19:16:58 -0500.

This page (3D Printing) was last updated on Dec 01, 2021.

Text editor powered by tinymce.