Here's an elegant wearables project for those really special occasions. A 3D Printed, LED Hair Dress, powered by an NeoPixel ring and Gemma, Adafruits tiny yet powerful wearables micro-controller.

This guide was written for the 'original' Gemma board, but can be done with either the original or M0 Gemma. We recommend the Gemma M0 as it is easier to use and is more compatible with modern computers

This guide was first published on Nov 13, 2013. It was last updated on Mar 18, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.