Before wiring and soldering things togeter, it's a good idea to fit all of the parts together to get an idea of the physical layout, how it will all fit in the bag, and how the switches will be accessed and how the battery will be recharged.

Place the GEMMA "face down" (the word GEMMA and Adafruit logo should be facing up, and then set the two Flora pixels, 12 x ring, and 16 x ring on top of it. This will allow you to access the reset button, battery port, and USB port once assembled.

 

 

This guide was first published on Oct 22, 2014. It was last updated on Mar 28, 2024.

This page (Fit It) was last updated on Oct 16, 2014.

Text editor powered by tinymce.