Parts
The following parts are the electronic parts for the project from Adafruit. Note the number of FLORA LEDs, you will need multiple, depending on your project.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
In Stock
So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em...
$34.95
In Stock
What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have...
$7.95
In Stock
Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are 'chainable' - connect the...
$7.50
In Stock
Be the belle of the ball with the NeoPixel Jewel! We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a...
$5.95
In Stock
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$14.95
In Stock
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible...
$1.95
In Stock
By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them.This PH2 Female/Male JST 2-pin Extension...
$2.95
In Stock
- Soldering iron - 120V US, 220V UK, 220V EU
- Soldering iron stand
- Solder
- Wire stripper
- Helping hands
- Solder Tip Cleaner
- Ventilation: the USB Rechargeable Mini Solder Fume Extractor from Phillip Burgess
These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground...
Out of Stock
A real stand with sponge and solidly-built sheet metal holder prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a...
$8.95
In Stock
The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This...
$6.95
In Stock
- Pleather Trim
- Scrap fabric for a battery holder
- Black standard thread
- Elastic – ¾” wide
- Double sided tape
- Temporary adhesive / blue tack
- E6000 or hot glue
- Sewing tools and supplies – a sewing machine, scissors, straight pins, tape measure, fabric chalk, etc.
- Dress form – Since a generic dress form may not match your proportions, you can always build one from scratch using one of these tutorials
