Props & Electronics
Build a 3D printed prop with a realistic looking flame! Use NeoPixels and GEMMA M0 to create a faux yet realistic looking torch. Hidden inside the torch is a mini fan and silk fabric. Use CircuitPython to easily program GEMMA M0 and NeoPixels.
3D Printing & Crafting
We designed and 3d printed the prop to house all of the electronics and features a modular design that allows parts to easily be swapped out. The flame is made from pieces of a silk that are cut and taped to a crossbar fitted over the neopixel jewel.
Inspired by Nick Dimelow's Medieval Torch project.
Prerequisite Guides
Take a moment to walk through the following guides.
Hardware
List of required hardware.
- 4x M3 x 30mm screws
- 12x M3 hex nuts
- 3x M2.5 x 6mm
- 3x M2.5 hex nuts
List of parts used to build the project.
The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the...
guides with product
$9.95
In Stock
Be the belle of the ball with the NeoPixel Jewel! We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a...
guides with product
$5.95
In Stock
This adorable little board will come in very handy whenever you need a good amount of 5V power. It's the size of a linear regulator, but it's actually a mini-booster! Input...
guides with product
Out of Stock
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
$9.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
