Neo

This protective case for a Neo Trinkey features a built in USB shell to help stabilize the board.

The print-in-place button allow you to access the reset button. 

Translucent filament helps to soften and diffuse the NeoPixel LEDs .

The large ring allows you to use bigger keychains or lanyards!

Capacitive Touch 

 

The Neo Trinkey case is also compatible with these optional 3d printed conductive touch pads using Conductive PLA filament. These allow you to route the touch pads to the top of the case, in addition to the back and front. 

Keyboard Inputs

 

The touch pads can be used as keyboard buttons! You can set the two touchpads to be an HID (Human Interface Device), like a shutter button on mobile devices or a macro pad on a computer!

 

All of the 3D Printed case parts snap fit together and print with minimal supports.

Parts

It's half USB Key, half Adafruit Trinket...it's Neo Trinkey, the circuit board with a Trinket M0 heart and  four RGB NeoPixels for customizable...
$6.95
In Stock

This guide was first published on May 25, 2021. It was last updated on 2021-05-25 10:38:49 -0400.

This page (Overview) was last updated on Jun 16, 2021.

Text editor powered by tinymce.