Image credit: keyhive.xyz

In this guide, you'll learn how to set up your Navi10 macropad to use KMK firmware. You'll use the Navi10, designed by /u/emdarcher, and the new Adafruit KB2040, to build a macropad that you'll put KMK firmware on and will also learn how to remap it and create your own configuration.

What is KMK?

KMK is a feature-rich and beginner-friendly firmware for computer keyboards written and configured in CircuitPython.

What is the Navi10?

Navi10 is a simple PCB kit meant to help people that miss their navigation cluster or just want a simple macropad.

The PCB comes with a built in diode bender and written instructions on how to build it.

Designed by /u/emdarcher

Parts

Navi10 Kit

Navi10 is a simple PCB kit meant to help people that miss their navigation cluster or just want a simple macropad.

$15.00

Angled shot of short pink microcontroller.
A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit...
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...

This guide was first published on Jan 11, 2022. It was last updated on 2022-01-11 22:16:18 -0500.

This page (Overview) was last updated on Aug 01, 2022.

Text editor powered by tinymce.