This is the Adafruit METRO Arduino-Compatible - with headers.  It's a fully assembled and tested microcontroller and physical computing board with through-hole headers attached.  If you don't want a Metro with the headers attached for...

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a

This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means you can use this as a buzzer for making beeps, tones and alerts AND you can use it as a sensor, to detect...

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from...

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are...

Oh say can you seeBy the knob's early light...Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a...

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of ten!Each pack...

Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The...

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional black.Each pack contains ten...

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and...

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery,

Discontinued - You can grab USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs instead!  A medium-sized rechargeable battery pack for your Raspberry...