Featured Products

Adafruit Feather 32u4 Bluefruit LE

PRODUCT ID: 2829
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$29.95
IN STOCK

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

PRODUCT ID: 2927
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar...
$19.95
IN STOCK

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board

PRODUCT ID: 1899
It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would...
$14.95
IN STOCK

Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors

PRODUCT ID: 3244
Does this guy look familiar? Of course it does! It's our Black, 3-Layer Round Robot Chassis Kit from
$24.95
IN STOCK

Lithium Ion Polymer Battery - 3.7v 500mAh

PRODUCT ID: 1578
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
$7.95
IN STOCK

4 x AA Battery Holder with On/Off Switch

PRODUCT ID: 830
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can...
$2.95
IN STOCK

Alkaline AA batteries (LR6) - 4 pack

PRODUCT ID: 3349
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAs. This is a...
$2.95
IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 20 x 6"

PRODUCT ID: 1954
These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip'...
$1.95
IN STOCK

Premium Male/Male Jumper Wires - 20 x 3" (75mm)

PRODUCT ID: 1956
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow...
$1.95
IN STOCK

Half-size breadboard

PRODUCT ID: 64
This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both...
$5.00
IN STOCK

Shield stacking headers for Arduino (R3 Compatible)

PRODUCT ID: 85
“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the...
$1.95
IN STOCK

Adafruit Pocket Screwdriver - Black

PRODUCT ID: 3284
Have you ever been in a situation where you desperately needed a screwdriver right away? Now you can have one at-the-ready all the time — enter the...
$1.50
IN STOCK

Little Rubber Bumper Feet - Pack of 4

PRODUCT ID: 550
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but...
$0.95
IN STOCK

USB cable - USB A to Micro-B

PRODUCT ID: 592
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
IN STOCK