Perma-Proto Power Rails

A piece of perma-proto can be useful for extended the voltage and ground pins. Use a rotary power tool to cut the power rails from the quarter size perma-proto PCB – Use a vice to lock down the PCB to a tabletop. Use a shop vac to capture the dust. 

2-wire ribbon cable

Use a 2-wire ribbon cable to connect the power and ground pins.

Wire Lengths

  • 2-wire ribbon cable – 52mm

Solder Wires to Pins

Solder the wires to the voltage and ground on the PCB.

Wired Perma-Proto Power Rails

This will be wired to the power and ground pins on the Adafruit Grand Central M4.

This guide was first published on Mar 18, 2020. It was last updated on Mar 18, 2020.

This page (Wiring Perma-Proto) was last updated on Sep 24, 2020.