Hardware for Neck and Head

Use the following hardware to attach the head of the guitar to the neck of the guitar.

Install Screws

Insert the M3 screws through the two mounting holes on the end of the neck-bottom.stl part. Place the head-case.stl part onto the threads of the screws and joint the two parts together.

Secure Hardware

Install and fasten M3 hex nuts onto the threads of the M3 screws. Use a pair of needle nose pliers to secure the neck-bottom.stl and head-case.stl parts together.

Assembled Neck and Head

The neck and head are now assembled and ready for the next set of assembly.

This guide was first published on Mar 18, 2020. It was last updated on Mar 18, 2020.

This page (Neck Head Assembly) was last updated on Feb 14, 2021.

Text editor powered by tinymce.