MX MIDI Guitar

by Ruiz Brothers and

published March 18, 2020, last updated September 13, 2024

posted in 3D Printing CircuitPython Arduino Compatibles/ Grand Central

46

Intermediate

Project guide

Install the LIS3DH

Hardware for LIS3DH

Get the M2.5 x 8mm screws and M2.5 hex nuts ready for the LIS3DH.

Install LIS3DH Screws

Insert and install 2x M2.5 x 8mm screws into the mounting holes. Insert and fasten 2x M2.5 hex nuts on to the threads of the screws.

Install LIS3DH to Neck

Place the LIS3DH into the neck of the guitar. Fit the thread of the screws through the two mounting holes on the neck of the guitar.

Secure LIS3DH to Neck

Insert and fasten 2x M2.5 hex nuts onto the threads of the screws.

Install Battery

Place the 500mAh battery into the neck of the guitar. Note: The battery cable is routed underneath the LIS3DH PCB for extra neatness.

Text editor powered by tinymce.

Search