Guitar Body – Bottom Half
Use the following hardware to assembly the bottom half of the guitar body.
- 4x M3 x 6mm pan head screws
- 4x M3 hex nuts
Install Machine Screws
Insert and fit the M3 machine screws through the tabs on the middle part of the bottom half of the guitar body.
Secure Machine Screws
Place the left and right parts of the bottom half of the guitar body onto the screw threads. Insert and fasten the M3 hex nuts onto the threads of the M3 screws. Use a pair of needle nose pliers to tightly fasten the hex nuts.
Guitar Body – Top Half
Use the following hardware to assembly the bottom half of the guitar body.
- 4x M3 x 6mm pan head screws
- 4x M3 hex nuts
Install and Secure Screws
Follow the same procedure for installing the hardware to the top half of the guitar body. Insert the M3 screw through the mounting tabs and use M3 hex nuts to secure the parts together.
Installing Guitar Body and Neck
Use the following hardware to secure the neck of the guitar to the top half of the guitar body.
- 3x M3 x 6mm pan head screws
- 3x M3 hex nuts
Install Neck to Top Half Guitar Body
Install the neck-bottom.stl part into the body-middle-top.stl part by press fitting them together. Check and ensure the three mounting holes are nicely lined up with each other.
Install Hardware into Neck
Insert the M3 screws into the neck-bottom.stl so the threads protrude through the body-middle-top.stl part.
Secure and Fasten Hardware
Insert and fasten the M3 hex nuts onto the threads of the M3 screws. Use a pair of needle nose pliers to get a holding of the M3 hex nuts.
