A Black woman's manicured hand holds a round microcontroller with lit up LEDs.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
guides with product
Out of Stock
Top down view of a Adafruit CRICKIT for Circuit Playground Express with a circular board connected.
Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that...
guides with product
$29.95
In Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
Micro servo with three pin cable
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo...
$5.95
In Stock
Mini Oval Speaker with pico blade connector
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
Out of Stock
Angled shot of power supply.
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works...
$7.95
In Stock
Angled shot of 3 x AA battery holder with 2.1mm plug. There are three AA batteries in the holder.
Here's another addition to our growing family of AA battery holders. A holder for three (3) AA batteries!...
$2.95
In Stock
Angled shot of 3 AA batteries.
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAs. This is a pack...
$2.25
In Stock
Mini Metal Speaker with Wires
Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We...
$1.95
In Stock
Thin Plastic Speaker with Wires
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated...
$1.75
In Stock
Angled Shot of the Speaker - 40mm Diameter - 4 Ohm 3 Watt.
Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power.At 40mm diameter it...
$4.95
In Stock
Friendly robot AdaBot Lunch Box
Your eyes do not deceive you – this is absolutely an AdaBot lunchbox! Whether you're sporting this at school, work, Maker Faire, or jury duty, this...
guides with product
$9.95
In Stock
Enclosed Speaker with JST cable
Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like...
Out of Stock