Bearing Mount Assembly

Install Mount Support

The bearing mount assembly is similar to the motor  assembly. They both need a rail mount and a support mount. Place the support mount under the bearing mount. Insert an M4 screw through the top of the bearing mount. Use an M4 hex nut to secure the two mounts together. 

Install Rail Mount

Place the rail mount under the bearing mount. Install hex nuts into the recessed areas of the rail mount. Insert and fasten M4 screws to secure the bearing mount to the rail mount.

Bearing Mount Subassembly

The bearing mount should look like this. Again, the slotted mounting holes are there so you can adjust the belt tension later on in the build. 

Last updated on 2018-01-02 at 11.20.41 PM Published on 2018-01-02 at 11.56.37 PM