3D Printed Parts

STL files for 3D printing will need to be oriented for print using either FDM or SLS machines.

Parts were built with PLA filament.

Original design source files may be downloaded using the links below.

Slice with Settings for PLA Material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 200c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

Supports

• For the Servo Horn: Normal
• Placement: Everywhere
• Support Patten: Concentric 
• Support Overhang Angle: 50
• Support Destiny: 10%
• Enable Support Interface Off
• Support Z Distance: .21
• Support Brim: 22