What If I Don't Have A 3D Printer?
Not to worry! You can use a 3D printing service or a local 3D printer operator to 3D print and ship you parts to you. This is a great way to get your parts 3D printed by local makers. You could also try checking out your local Library or search for a Maker Space.
Slice Settings
These settings are for a 0.4mm and 0.8mm nozzle profiles using CURA 3.4.1. Optimized for the Ultimaker 2/3.
- Nozzle .4mm
- Layer Height .2mm
- Line Width .38 to .4mm
- Print Speed 50mm/s or 70mm/s
- Retraction 6.5mm
- Build plate adhesion type – skirt
- Bed 60c
- No supports
Fusion 360 files
Below are links to modify the design of the enclosure, noodle size and motor parts to fine tune them to adjust to your printer tolerances.
Design Source Files
The enclosure assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, SAT and more. Electronic components like the board, displays, connectors and more can be downloaded from our Fusion 360 CAD parts github repo.
Page last edited March 08, 2024
Text editor powered by tinymce.
