Fasteners

• 6 each M2.5 x 4mm nylon screw
• 6 each M2.5 x 6mm nylon screw
• 1 each M2.5 x 10mm nylon screw
• 1 each M2.5 nylon hex nut
• 6 each M2.5 x 6mm nylon threaded standoff
• 4 each M2.5 x 16mm steel screw
• 4 each M2.5 x 6mm steel flat washer
• 4 each M2.5 steel hex nut

The nylon fasteners are included in the Adafruit M2.5 Black Nylon Screw Set (https://www.adafruit.com/product/3299).

Steel screw fasteners were obtained from Tacoma Screws (www.tacomascrew.com).

Supplies

• 3 each heat shrink tubing, 3/4 inch long, 3/32 inch diameter (https://www.adafruit.com/product/1649)
• Washable glue stick
• Gel-type superglue, E6000 adhesive, or acrylic cement.
• Solder
• Two tiny dots of blue tack (Fun-Tak Mounting Putty https://www.amazon.com)

Tools

• Small Phillips screwdriver
• Wire strippers (https://www.adafruit.com/product/527)
• Wire cutters (https://www.adafruit.com/product/152)
• Scissors
• Sharp hobby knife
• Soldering iron
• Hand countersink tool
• Automatic or manual center punch
• Power drill or drill press with:
• 1/16 inch drill bit
• 1/8 inch drill bit
• 1-7/8 inch hole saw (https://www.grainger.com)
• 3/16 to 7/8 inch step drill bit (http://www.homedepot.com)