Time

Setting the time

Set time

We'll now set the time, you can change the 12/24 hour mode now. In this example, we'll have 12hr mode but of course 24 hour is the same except that theres no A/P notation.

Press MENU to enter the configuration menu. Press MENU again to advance to Set Time.
Press SET to start setting the time. Press + to increment the hours. When you're done, press SET to advance.
Press + to increment the minutes. When you're done, press SET to advance.
Press + to increment the seconds. When you're done, press SET to save the time.
MONOCHRON® is a registered trademark of Adafruit Industries
This guide was first published on Aug 06, 2014. It was last updated on Aug 06, 2014. This page (Time) was last updated on Mar 30, 2019.