# Monitor Your Home With the Raspberry Pi B+

## Introduction

![](https://cdn-learn.adafruit.com/assets/assets/000/022/963/medium800/sensors_main_picture-845x321.jpg?1423585037)

There are lots of devices on the market that allow you to monitor your home from a central interface. In this article, we are going to make our own DIY version of such devices. To do so, we will use the latest Raspberry Pi board, the B+ model, and the official [Raspberry Pi camera module](http://target.georiot.com/Proxy.ashx?TSID=5093&GR_URL=http%3A%2F%2Fwww.amazon.com%2FRaspberry-5MP-Camera-Board-Module%2Fdp%2FB00E1GGE40%2Fref%3Dsr_1_1%3Fie%3DUTF8%26qid%3D1423034671%26sr%3D8-1%26keywords%3Draspberry%2Bpi%2Bcamera). We will also perform some measurements from a temperature and humidity sensor.

At the end of the article, you will be able to build an interface to access the camera and the sensor recordings from a single page. We will also see how to acess this interface from anywhere in the world. Let’s dive in!

- [Next Page](https://learn.adafruit.com/monitor-your-home-with-the-raspberry-pi-b-plus/hardware-and-software-requirements.md)

## Related Guides

- [Breadboards for Beginners](https://learn.adafruit.com/breadboards-for-beginners.md)
- [Animatronic Fizzgig MonsterM4sk Puppet](https://learn.adafruit.com/animatronic-fizzgig-monsterm4sk-puppet.md)
- [Scrambled Number Security Keypad](https://learn.adafruit.com/scrambled-number-security-keypad.md)
- [Distance Measurement with Ultrasound](https://learn.adafruit.com/distance-measurement-ultrasound-hcsr04.md)
- [Solderless Robot Toy Xylophone](https://learn.adafruit.com/solderless-robot-toy-xylophone.md)
- [Using QMK on RP2040 Microcontrollers](https://learn.adafruit.com/using-qmk-on-rp2040-microcontrollers.md)
- [Feather Waveform Generator in CircuitPython](https://learn.adafruit.com/waveform-generator.md)
- [Integrating Home Assistant with Adafruit IO](https://learn.adafruit.com/integrating-adafruit-io-with-home-assistant.md)
- [Ladyada's Toolkit](https://learn.adafruit.com/ladyadas-toolkit.md)
- [CircusPython: Jump through Hoops with CircuitPython Bluetooth LE](https://learn.adafruit.com/circuspython-jump-through-hoops-with-bluetooth-le.md)
- [Using LoraWAN and The Things Network with CircuitPython](https://learn.adafruit.com/using-lorawan-and-the-things-network-with-circuitpython.md)
- [Digital Inputs with Adafruit IO WipperSnapper](https://learn.adafruit.com/digital-inputs-with-adafruit-io-wippersnapper.md)
- [I Vote(d) Pin](https://learn.adafruit.com/i-vote-d-pin.md)
- [IoT Temperature Logger with Analog Devices ADT7410, Feather and Adafruit IO](https://learn.adafruit.com/iot-temperature-logger-with-arduino-and-adafruit-io.md)
- [Make a Pi Trash Classifier with Machine Learning and Lobe](https://learn.adafruit.com/lobe-trash-classifier-machine-learning.md)
