Introduction

There are lots of devices on the market that allow you to monitor your home from a central interface. In this article, we are going to make our own DIY version of such devices. To do so, we will use the latest Raspberry Pi board, the B+ model, and the official Raspberry Pi camera module. We will also perform some measurements from a temperature and humidity sensor.

At the end of the article, you will be able to build an interface to access the camera and the sensor recordings from a single page. We will also see how to acess this interface from anywhere in the world. Let’s dive in!

This guide was first published on Feb 12, 2015. It was last updated on Sep 20, 2018. This page (Introduction) was last updated on May 04, 2015.