The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC...

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is...

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simply snap the QT Py...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes...

Have you ever been in a situation where you desperately needed a screwdriver right away? Now you can have one at-the-ready all the time — enter the Adafruit Pocket Screwdriver!OK, it's a little tough to write exciting copy for a pocket...

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more.  If you want something just like it but for Micro B, we have a B...

The all-in-one Internet of Things service from Adafruit you know and love is now even better with IO+. The 'plus' stands for MORE STUFF! More feeds, dashboards, storage, speed. Power up your Adafruit IO with the $99 pass for 1 year of the...