• Soldering iron
  • Multimeter
  • Wire cutters
  • Precision screwdrivers


This hack will work with just about any servo... but the ones that have the potentiometer contacts in a row will be the easiest (by far) to mod.

Here is an example of a standard Micro 9g servo driver with the potentiometer leads removed. We will be placing resistors between those three contacts on the bottom.

This guide was first published on Nov 04, 2013. It was last updated on Nov 04, 2013.

This page (Tools / Materials) was last updated on Nov 03, 2013.

Text editor powered by tinymce.