3D Printing

3D Printed Mini UNTZtrument Enclosure

This 4 piece design houses the components and keeps them secured with machine screws. The Arduino Leonardo is mounted to the bottom cover with 4 screws. 4 potentiometers are mounted to the top panel and secured in place. The Trellis is mounted to a tray that is secured to the enclosure with another set of machine screws. A total of 14 screws makes this pretty solid and durable box.

Customize Solids

If your interested in removing or adding new components, the original solids of the design are available for free to edit on Autodesk 123D.

Slicer Settings

We recommend using the slice settings below. For really great quality prints, we recommend using PLA over ABS.
mini-oontz-cover.stl
mini-oontz-tray.stl
mini-oontz-frame.stl
mini-oontz-bottom.stl
[email protected]
2 Shells
10% Infill
90/120 Speeds
0.2 Layer height
This guide was first published on Jul 30, 2014. It was last updated on Jul 30, 2014. This page (3D Printing) was last updated on Sep 14, 2019.