Pink polished fingers holding a Adafruit GEMMA M0 - Miniature wearable electronic platform.
The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the...
$9.95
In Stock
Angled shot of a pink translucent round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
Discontinued
Video of 30mm translucent blue LED arcade button flashing on and off.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right...
$2.50
In Stock
Angled shot of ten 20 cm long quick-connect wire pairs.
Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto...
$4.95
In Stock
 Bundle of Small Alligator Clip to Male Jumper Wires
For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little...
$7.95
In Stock
Top-down view of 6 pairs of short wire alligator clips.
Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color coded. You get 12...
$3.95
In Stock
USB Cable - 6" A/Micro B
This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).
$2.95
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
In Stock
Detail of Slotted Aluminum Extrusion end
Oh boy, now you have no excuse for not building that robot! Nothing is easier or faster than building with extrusion and we've added 20mm square aluminum extrusion and components...
$7.50
In Stock
L-Plate for 2020 Aluminum Extrusion
Attach various pieces of 20mm slotted aluminum extrusion together with this 5-hole corner plate.Measures 60mm long x 60mm wide, 4mm thick. 5.3m drill holes 20mm apart so...
$2.95
In Stock
Aluminum Extrusion Double Corner Brace Support
Brace yourself! You'll definitely want to pick up a couple of these double corner brace supports when working on a project with 20x20 extrusion. They're nice and solid, made of...
$1.95
In Stock
Plastic Hinge for 20x20 Aluminum Extrusion
Get swinging with this handy plastic hinge, attach it to your 20mm extrusion and you can have parts that swing open 180 degrees. Using our button screws, the bumpy heads make it close...
$0.95
In Stock
Pile of 50 Button Hex Machine Screw
Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm hex wrench to attach/detach. This...
Discontinued
Pile of 50 Aluminum Extrusion Slim T-Nuts
An essential for working with slotted aluminum extrusion, these slim metal nuts slide into the side-slot of the extrusion. The slightly oval shape means that as they screwed-into the...
$11.95
In Stock
Allen Wrench
To build all your fun CNC machines, you'll need an Allen key! This one is 2.5mm in size and works with our M4 screws and will make assembling your extruded aluminum project a...
Discontinued
Aluminum Extrusion End Cap
Finish your project in style with these snap-on caps. Made of a soft plastic, they'll make your project look more professional. Comes in a pack of 10 and fits onto the ends of our...
$4.95
In Stock