Solder Display
Use silicone ribbon cable to solder the display to the pins on the Feather board.
Frame
The frame cutout can pass through the wires. Align the standoffs to the display and feather board.
Slide Switch
Measure and cut wires to connect the slide switch to the EN and GND pins on the Feather board.
Place in Case
Connect the 420mAh battery to the JST port. Fit the battery wires into the case and angle the display and board to fit into the case.
Fit Slide Switch
Align the slide switch to the walls inside the case. Press fit the switch at and angle to secure it to the case.
Attach Lid
Align the lid and face plate to the case. Press fit to attach.
Face Plates
The Nintendo joystick pieces are glued to the face plate and press fitted over the case.
The TV face plate aligns to the screen cut out and press fit over the case.
Complete
And that's it! We think these cute displays would go great with dioramas, lego builds or really any projects with miniatures.
Text editor powered by tinymce.
