3D Printed Parts

Below is a list of all the 3D printed parts in this project. There's a total of 10 parts. The parts are oriented to 3D print "as-is" and does not require any support material.

  • pet-displayBase.stl
  • pet-keyCover.stl
  • pet-frame.stl
  • pet-frame-bottCover.stl
  • pet-frame-backCover.stl
  • pet-displayCover.stl
  • pet-pad.stl
  • pet-keys.stl
  • pet-display.stl
  • pet-displayFace.stl

Slice Settings

Most of these settings will need to change depending on your 3D printers configuration, and choice of material. Below are the settings we used on a Sigma BCN3D printer using PLA filament.

  • 220C extruder – 65C heated bed
  • 20% Infill – 0.2mm layer height
  • 60mm/s travel – 150mm/s default speed
  • 0.4mm nozzle – 100% extrusion multiplier

Download & Remix

If you're interested in making changes to the design, the source is public. You can download the source in many different formats such as IGS, STEP, SAT, Google SketchUp, and more.

2D Print the Label

The label on the front panel is "2D" printed on sticker paper. You can make your own or download and use the one we made.  This is obviously totally optional, but it does make the project ressemble the Commodore PET series :-)

This guide was first published on Nov 30, 2016. It was last updated on Nov 30, 2016.

This page (3D Printing) was last updated on Nov 15, 2016.

Text editor powered by tinymce.