Remove the protective backing from the copper foil squares and place them on the 3D printed square pads. The 3D printed squares have slots for the wires to sit in.

Dab hot glue onto the top of a spring and attach it to the indented corner of the 3D printed square. Repeat this for the three other springs.

Dab hot glue onto the tops of the secured springs. Place the springs into the corners of the second 3D printed square. 

Repeat this process for the remaining stomping pads.

This guide was first published on Dec 14, 2021. It was last updated on Jun 19, 2024.

This page (Assembly) was last updated on Mar 08, 2024.

Text editor powered by tinymce.