43
Intermediate
Project guide
Overview
This guide will show you how to build miniature percussion instrument which can be controlled via MIDI over USB. The example project is intended to serve as a jumping-off point for your own designs. Read about how I built mine, then experiment to make a unique instrument you can control with your computer.
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed...
$19.95 each
In Stock
Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants...
Out of Stock
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean...
$7.95 each
In Stock
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the...
$4.95 each
In Stock
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our...
$1.95 each
In Stock
This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work...
$4.95 each
In Stock
Have you ever been in a situation where you desperately needed a screwdriver right away? Now you can have one...
$1.50 each
In Stock
These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot...
$4.95 each
In Stock
Mounting board
Something to mount your drumkit on
#4 screws
(×8)
for mounting solenoids
#4 washers
(×8)
for mounting solenoids
DIY drums
(×4)
any small objects that make cool sounds when struck
Hot glue gun and glue sticks
for mounting drums
Page last edited July 15, 2024
Text editor powered by tinymce.
