ULN2803A Setup

Save Subscribe

DIP Socket

The ULN2803A will snap onto an 18 pin DIP socket. This allows the IC to be removable if it ever needs to be replaced.

Installing Dip Socket

The DIP socket is placed onto the Perma-Proto half size PCB. Reference the photo for best placement. Use pieces of mounting tack to temporarily secure the socket to the PCB.

Solder Socket to Perma-Proto

Apply solder to all 18 pins from the bottom the Perma-Proto.

Double Check

Check to ensure all of the pins are properly soldered and have solid solder joints.
 Feather Header Setup PermaProto Wiring 

This guide was first published on Aug 05, 2020. It was last updated on Aug 05, 2020.

This page (ULN2803A Setup) was last updated on Oct 12, 2021.

Text editor powered by tinymce.