CAD Files
Matrix CAD Assembly
The matrix frame is two 4x6 grids that are joined together with connectors. The grids are fitted into the two frames with a diffuser panel fitted in between the two parts. Leg stands are fitted on both sides of the frame with a slight angle.
CAD Parts
Individual 3MF files for 3D printing are oriented and ready to print on FDM machines using PLA/PETG filament. Original design source files may be downloaded using the links below. Make copies of the following:
- 2x Frame
- 2x Grid
- 2x Connector
- 2x Diffuser
Feather Case CAD
The Feather PropMaker RP2040 is secured to a three-piece snap fit enclosure. The PCB is secured under corner clips, with no hardware fasteners on the bottom cover. A frame is fitted over the bottom cover with cutouts for the USB-C port and the screw block terminals. The top cover snaps over the frame with access to the STEMMA QT port and the two on-board buttons, boot and reset.
Diffuser Options
You have the option to choose the material for the diffuser panel. If you want to 3D print the panel, a white translucent filament works well.
If you want a more saturated, matte black finish, choose the Black LED acrylic material. You will have to cut the acrylic down to size using the included template.
Page last edited March 25, 2026
Text editor powered by tinymce.
