TCA9548A

  • SC7 to sensor 1 SCL
  • SD7 to sensor 1 SDA
  • SC6 to sensor 2 SCL
  • SD6 to sensor 2 SDA
  • SC5 to sensor 3 SCL
  • SD5 to sensor 3 SDA
  • SC4 to sensor 4 SCL
  • SD4 to sensor 4 SDA
  • SC3 to sensor 5 SCL
  • SD3 to sensor 5 SDA
  • SC2 to sensor 6 SCL
  • SD2 to sensor 6 SDA
  • SC1 to sensor 7 SCL
  • SD1 to sensor 7 SDA
  • SC0 to sensor 8 SCL
  • SD0 to sensor 8 SDA
  • SDA to board SDA
  • SCL to board SCL
  • GND to board GND
  • VIN to board 3.3V

Feather RP2040

  • GND to STEMMA QT GND
  • GND to lasers' GND
  • 3.3V to STEMMA QT VIN
  • 3.3V to switch
  • Plug the Feather RP2040 and Music Maker FeatherWing into a FeatherWing Doubler

STEMMA and Laser VIN and GND Connections

  • Connect the VL53L4CDs' VIN and GND connections together with STEMMA QT cables
  • Wire the lasers' GND connections (black wires) together
  • Wire the lasers' VIN connections (red wires) together and connect them to the switch

This guide was first published on May 10, 2022. It was last updated on 2022-05-10 22:10:08 -0400.

This page (Circuit Diagram) was last updated on May 20, 2022.

Text editor powered by tinymce.