The final step in securing the servos is installing the top of the servo cage. Begin by press fitting the main piece behind the front row of servos.

Secure the main piece to the bottom base with an M3 screw and nut.

Attach the first servo with an M2 screw. There are mounting holes for the entire front row of servos that align with the servos' top mounting hole.

Attach the rest of the front row of servos with M2 screws to the main piece.

Press fit the back piece behind the back row of servos.

Attach the back piece to the bottom piece with M3 screws and nuts.

Secure the back row of servos to the back piece with M2 screws. The screw will thread through the back piece, servo mounting hole and the mounting hole on the main piece.

Secure the remaining servos in the back row with M2 screws.