4
Intermediate
Project guide
3D Printing and Drill Templates
You can 3D print a mount for the PiCowbell that hooks onto the MIDI and DC jacks inside the enclosure. This secures all of the electronics inside of the enclosure.
The mount has mounting holes for the PiCowbell and the MPM3610. The rings slide over the DC and MIDI jacks.
Drill Templates
The drill templates for the enclosure are available as both an .STL file that you can 3D print and an .SVG file that you can print out on paper. The templates align with the edges of the enclosure.
Page last edited January 27, 2026
Text editor powered by tinymce.
